Page 283 - Pages from 8. 2017 New 26-05-21 No Table- 2nd Half

When the machine is as standard as at present, if any user is to go through stage one and
“Tick yes you are trained to use this machine,” once at stage two if you press the two green
buttons at the front of the machine simultaneously, that person will hear a breaker click in the
back of the machines fuse box, this shows code: E21.01 and has three lights, the top light is
always active named supply and in consequence to the two green buttons being push together
R2 will become active, with no response from the press carriage motor.
My questions are:
1. Does Morgana sell used parts at a discount from new, priced parts?
2. How much would a press carriage motor cost in any of them instances?
3. If I continue to do a further diagnostic of the press carriage motor, I will split the
differential gearing from the motor and attempt to run the motor from an external power
supply, once again hoping to keep the cost down in aiding to fix the machine.
4. How much will Morgana supply the required thermostat for after vat?
5. How much will Morgana supply a press carriage motor without gearing attached?
6. How much will Morgana supply gearing for the press motor without the motor attached?
7. How much will Morgana sell the carriage motor and gearing together for? While I was in
the fuse box at the back of the machine, I notice two more fuse controllers that are not active
with present Semiconductor High Voltage Glass Passivated Junction Rectifiers the fuse board
numbers are as follows; Km20.01 Km23.01 on further research of them empty fuse slots,
after reading the wiring schematics it states that the usage for them slots are:
1. KM20.01 = Main Enabling
2. 2Km23.01 = Heating Enable Another question I have to ask for your response in is; should
those two slots be without fuses as they are at present?
3157,
I also would like to question whether you supply the glue and blue beans needed to operate
the machine and pricing if so if not, please can you help provide a supplier for such products.
If I resolve the issues, the machine gets faced, with at the present time I would like to order
the flat end screws needed to service the glue station so for the glue to get extruded through it
correct path at its optimal performance and therefore request the following price of them parts
of your self’s.
I would appreciate any help or advice that you or your team members may have in helping to
get the Morgana pur 150 re-commissioned.
Many thanks and kind regards Mr S. Cordell.

George Quinton
got involved in assaulting me with his friends!

37.
Additional Email Attachments & Emails / Issue:
37. 0. 2.
Too Smooth Morgana -1-20741 26-04-2017 09-46
26/04/2017
/ Page Numbers: 134,135,136,137
--
134,
Subject: Undeliverable: In regard to a pur 150
Delivery has failed to these recipients or groups:
spairs@rnQraa~iacQ.uk fspairs@mciraana.cci.uk)