Page 284 - Pages from 8. 2017 New 26-05-21 No Table- 2nd Half

The e-mail address you entered couldn't be found. Please check the recipient's e-mail address
and try to resend the message. If the problem continues, please contact your helpdesk.
Diagnostic information for administrators:
Generating server: plockmatic.se
spairs@moraana.co.uk
135,
Same as Above!
136,137,

38.
Additional Email Attachments & Emails / Issue:
38. 0. 2.
Morgana -1-26356 26-04-2017 09-46
26/04/2017
/ Page Numbers: 138,139
--
138,
From: Rewired <re_wired@ymail.com>
Sent time: 26/04/2017 09:45:47 AM
To: spairs@morgana.co.uk
Subject: In regard to a Pur 150
Dear Mike and Mat
Hello how are you doing, I hope all is well I spoke to a gentleman on the 24/04/2017 on the
phone called mike in regards to a Morgana Pur 150 that I am interested in purchasing from
another person, mike then passed the phone to a man called Mat, who then asked me to send
this reply. The machine I am able to buy seems to come with its own problems and I request
your help in solving the issues.
Diagnostic; when the machine is first turned on it allows any user to go to the first stage
which is; “Are you trained to operate this machine” once ticked in agreement the power to the
machine will flip the main distribution power supply but does not blow the machines internal
fuses.
On a diagnostic of the problem you have to take the two covers of the back of the machine
and bypass the safety mechanism for the hatch door being closed.
Connected to the bottom of the glue station, to which you put the glue into is a thermostat,
this thermostat has two additional wires connected into it.
The marks on the thermostat states that it is a; Mfr. Part No.2455RC Thermostat, Solder Tag
Termination, 0°C +260°C
When disconnected and the machine is rebooted with power it will bypass to the second
stage; “Main menu”
Once into the main menu the machine goes into alarm mode in turn disabling its features.
The features that seem to be disabled are the following:
1. milling station: -
2. Press carriage.
On a further inspection towards the resolution of the error codes; they are labelled as follows:
1. 007 Error movement of press: -
2. 009 Cleaner not present: -
3. 010 Temperature not ok: -
4. 011 Execute present: -
5. 019 Critical Temperature.